Learn SRM – Part 4.6 – Create Cluster and Volumes in HP VSA

In previous post, we created a management group. Now we need to create Cluster and Volumes in HP VSA.

• Login to HPE StoreVirtual Centralized Management Console.
• Click on Management Group – ‘Pathshala-Protected-Group”.

• Click on Management Group Tasks in right panel.
• Click on New Cluster.

• Select Standard Cluster and Click on Next.

• Give name of Cluster and select VSA system.

• Add Virtual IP which you will use when adding iSCSI targets in ESXi host. We will see in next post.

• Create Volume and give a appropriate name. Click on Next.

• You have completed Management Groups, Cluster, and Volumes. Review the summary. Click on Close.

• Review the console and perform same steps for Recovery Management group.

• Here I have created a Cluster and Volume for Recovery Management group.

Take a look in below topics, explore and learn Site Recovery Manager: –

• Learn SRM – Part 1 – Introduction of VMware Site Recovery Manager 8.1
  

• Learn SRM – Part 2 – Understand VMware Site Recovery Manager Licensing

• Learn SRM – Part 3 – Understand Minimum Requirement for SRM in your Home Lab

• Learn SRM – Part 4 – Prepare for Replicated Storage in you Home Lab (Ignore this step in Real Environment. You need to interact with Storage team for all these tasks in real environment)

  • Learn SRM – Part 4.1 – Deploy HP VSA in Both Site

  • Learn SRM – Part 4.2 -Configure HP VSA Appliance Networking in both Site

  • Learn SRM – Part 4.3 -Install HP CMC Management Console

  • Learn SRM – Part 4.4 -Add Appliance in HP CMC

  • Learn SRM – Part 4.5 -Create Management Group in HP VSA

  • Learn SRM – Part 4.6 -Create Cluster and Volumes in HP VSA

  • Learn SRM – Part 4.7 -Find and Add ISCSI Initiator in ESXi Host

  • Learn SRM – Part 4.8 -Assign Volume to ESXi Host

  • Learn SRM – Part 4.9 -Scheduling Array Based Replication

• Learn SRM – Part 5 – Install VMware Site Recovery Manager 8.1 (SRM)

• Learn SRM – Part 6 – Install SRA (Storage Replication Adapter)

• Learn SRM – Part 7 – Configure Site Pairing for both Protected and Recovery Site
  

• Learn SRM – Part 8 – Configure SRM Array Manager Pairing

• Learn SRM – Part 9 – Configure Resource Mapping in VMware SRM
  

• Learn SRM – Part 10 – Create Placeholder Datastore in VMware SRM
  

• Learn SRM – Part 11 – Configure Protected Groups in VMware SRM
  

• Learn SRM – Part 12 – Configure Recovery Plans in VMware SRM
  

• Learn SRM – Part 13 – Perform Test Drill using VMware SRM
  

• Learn SRM – Part 14 – Perform Cleanup Activity in VMware SRM
  

• Learn SRM – Part 15 – Perform Cleanup Activity in VMware SRM