Learn SRM – Part 4.2 – Configure HP VSA Appliance Networking in both Site

In previous post, we explored how to deploy an HP VSA System. Now we are going to configure HP VSA appliance networking.

  • Access vSphere Web Client and access appliance which we recently deployed in previous article.
  • Go to Host and Click on Virtual Machines Section. You will see HP VSA appliance system as a Virtual machine over there. Now right click on that and click on Open remote console.
  • Open Console for HP VSA Appliance. You will get below screen.

2018-08-21 14_20_53-cp-host-pr-03.localdomain - VMware ESXi

  • Type Start

2018-08-21 14_23_43-cp-host-pr-03.localdomain - VMware ESXi

  • Select Login and Press Enter.

2018-08-21 14_23_50-cp-host-pr-03.localdomain - VMware ESXi

  • Select Network TCP/IP Settings.

2018-08-21 14_29_31-cp-host-pr-03.localdomain - VMware ESXi

  • Select eth0.

2018-08-21 14_29_37-cp-host-pr-03.localdomain - VMware ESXi

  • Provide hostname which want to put for HP VSA system.
  • Provide IP Address configuration for HP VSA.
  • Click on OK.

2018-08-21 14_29_40-cp-host-pr-03.localdomain - VMware ESXi

Perform the same steps for both appliances in Protected and Recovery Site.

Take a look in below topics, explore and learn Site Recovery Manager: –